Phone: 1-888-735-3012

T&G Connect

Quik-Therm Connect - High Performance Rigid Insulation with Built-In Plywood Strapping

 

3/4" thick X 2 1/2" wide X 8' long plywood nailing strips battens/strapping are embedded within the Connect insulation panels. The plywood battens attach directly to framing members. In-turn, cladding materials are fastened to the battens.

In simulated winter-like Canadian conditions, T&G Connect wall assemblies were tested by a certified laboratory.

The results of these tests were used to design wall assemblies that would meet or exceed new, stricter energy code requirements.


 

SPECIFICATIONS

2" & 3" thicknesses. 16" or 24" O.C. Custom thicknesses and densities available. Meets vapour and air barrier requirements.

 

 

 

 

 

ADVANCED FRAMING

Attaches directly to framing members. No exterior sheathing required.

 

 

 

 

INSTALLS FAST

Insulation, air and radiant barrier ... ALL in ONE. No building wrap needed. Nail gun friendly. Installs in 50% LESS TIME than conventional foam board insulation and strapping.

 

 

 

TONGUE & GROOVE CONNECTION

Aligns panels, stops air leaks and supports panels during installation.

 

 

 

 

COLD CLIMATE TESTED

Connect has been tested to an environment similar to Canadian winters. Temperature range: Outside -18C/Inside +21C with a 22 KPH wind/-31 wind chill.

 

 

OUTPERFORMS R-2000 STANDARD BY 45%

Conventional 2x6 wood walls & R-20 fibreglass perform at Effective R-15.4 ... 25% less than the stated R-value.

2x4 walls with 2" Connect blended with just 3.5" of fibreglass achieve R-23.1.

 

 

 

INCREASED LIVING SPACE

2x4 walls meet building code requirements, reduce construction cost and increase living space. By utilizing 2x4 construction, fewer trees are harvested.

 

 

 

STOPS ENERGY LOSS THROUGH FRAMING

T&G Connect virtually stops Thermal Bridging (energy loss) through framing. Connect is ideal for most ceiling and roofing applications.

 

 

 

REFLECTS RADIANT ENERGY BACK TO ITS SOURCE

Superior comfort, winter and summer.

Guaranteed lower energy bills.

 

 

 

IDEAL FOR COMMERCIAL AND AGRICULTURAL BUILDINGS

SAVES material and labour dollars.

INSTALLS FAST.

 

 

 

PERFECT FOR TIMBER FRAME ROOFS, CEILINGS AND WALLS

T&G Connect attaches directly to rafters, joists and exterior walls. No strapping required.

 

 

 

WHICH INSULATION SYSTEM WOULD YOU WANT IN YOUR HOME OR BUILDING?

 

Dark colors indicate moisture, air leakage, energy loss and higher energy bills.   Light colors promise a comfortable and healthy living environment and low energy bills.
IR Image: R-20 Fibreglass & Wood Studs   IR Image: 2x4 Wall (R-12 & 2" Connect)
R-20 Fibreglass & Studs   2x4 Wall (R-12 & 2" Connect)

 

No Mold

 

 

HEALTHY LIVING ENVIRONMENT

NO moisture, NO mold, NO formaldehyde.

 

 

Environmentally Responsible

ENVIRONMENTALLY RESPONSIBLE

Quik-Therm Connect does not produce ozone depleting off gasses. It may contain up to 15% recycled expanded polystyrene (EPS). T&G Connect improves lifestyles and comfort while preserving natural resources and the ecosystem.

 

 

Best Value Saves Energy Dollars Installs Fast

Bottom Banner